All Product Categories

Three-way Tap
5 to 1,000MHz Three-way Tap with Micro-strip Circuit Design - GC-1103 

21X Switch
21X Switch with Frequency Range of 950 to 2,400MHz - GC-SW21XB

3-way Splitter Amplifier
3-way Splitter Amplifier with Gain Adjustable Functions Manually and Fast Heat-sinking - GCH-203G 

6-way Splitter Amplifier
6-way Splitter Amplifier with Fast Heat-sinking, Housing Made of Aluminum Die-cast - GCH-206G 

2 x 1 DiSEqC 2.0 Switch
2 x 1 DiSEqC 2.0 Switch with Zinc Die-cast Housing, Professional Circuit Design and Low Loss - GD-21A

Multiswitch
Multiswitch with 2 Satellite Inputs and One Receiver Output, Supports DiSEqC Standyby Commands - GD-21B

DiSEqC 2.0 CATV Accessories
DiSEqC 2.0 CATV Accessories, Supports Bi-directional Full Control Functions, Designed for Outdoor - GD-21E

DiSEqC Switch 2.0
Four-in-one DiSEqC Switch 2.0 with 3dB Insertion Loss and 75 Ohms Impedance - GD-41B

DiSEqC Switch 2.0
Four-in-one DiSEqC Switch 2.0 with Impedance of 75 Ohms - GD-41C

4 x 1 DiSEqC Switch
4 x 1 DiSEqC Switch with 950 to 2,400MHz Frequency Range and 75Ω Impedance - GD-41E

Bi-directional DiSEqC 2.0
Bi-directional DiSEqC 2.0 with Zinc die-cast Housing and Nickel-plated, Supports Standby Commands - GD-41L

4 x 1 DiSEqC Switch
4 x 1 DiSEqC Switch with Nickel Plating, Professional Circuit Design and Low Loss - GD-41N

SAT 3-way Splitter
SAT 3-way Splitter with High Isolation and DC Power Passing, Made of Zinc Die-cast Housing - GS01-03

Zinc Die-cast Housing 8-Way Amplifier Splitter
Zinc Die-cast Housing 8-Way Amplifier Splitter with ≤9.5 ±1.5 Gain at 950 to 1250MHz - GS02-08 

2-in-2 Multiswitch
2-in-2 Multiswitch with Professional Circuit Design and Low Insertion Loss - MS-2201

2 x 6 Multiswitch
2 x 6 Multiswitch with Cable Power from Satellite Receiver to LNB and 13 to 14/17 to 18V Volatge - MS-2601

CATV Accessories
CATV Accessories with 4 SATV Signals Switched Through 13/18V Voltage and 0/22kHz Frequency - MS-4401

DiSEqC 2.0 Multiswitch
DiSEqC 2.0 Multiswitch with 9-in-4 Outputs and SAT Frequency Range of 950 to 2,150MHz - MS－9401P

2-in-1 Multiswitch
2-in-1 Multiswitch, LNB Switched By 13/14V and 17/18V from Coaxial Cable, for SAT Signal - SW-01/E

Switch
Switch with 0/12V Voltage, Cable Power from Satellite Receiver to LNB - SW-02/E